Home » Fusion Middleware & Colab Suite » Business Intelligence » Installation of OBIEE in Unix hangs and don't complete (OBIEE 10.1.3.3.3)
Installation of OBIEE in Unix hangs and don't complete [message #458743] Tue, 01 June 2010 12:10 Go to next message
arpeag
Messages: 1
Registered: June 2010
Location: Mexico
Junior Member
Hi,

This is my problem, I made an installation of OBIEE in Unix, but this hangs and don't complete, this is what I do:

First at all, I uninstall completly OBIEE, because my customer need an installation from zero. I made this uninstallation with a "oracle" user in Unix.

- I delete OracleBI and OracleBIData directories from directory where were installed.
- Provided permission to all directories that I use, like directories where I will install OracleBI and OracleBIData directories, and where it is JDK.
- Setup ulimit -n to 10240.
- I setup kernel parameters with following values:
Tunable Value Expression Changes
NSTREVENT 50 Default
NSTRPUSH 16 Default
NSTRSCHED 0 Default
STRCTLSZ 1024 Default
STRMSGSZ 0 Default
acctresume 4 Default
acctsuspend 2 Default
aio_listio_max 256 Default Immed
aio_max_ops 2048 Default Immed
aio_monitor_run_sec 30 Default Immed
aio_physmem_pct 10 Default
aio_prio_delta_max 20 Default Immed
aio_proc_thread_pct 70 Default Immed
aio_proc_threads 1024 Default Immed
aio_req_per_thread 1 Default Immed
allocate_fs_swapmap 0 Default
alwaysdump 0 Default Immed
chanq_hash_locks 256 Default
core_addshmem_read 0 Default Immed
core_addshmem_write 0 Default Immed
create_fastlinks 0 Default
dbc_max_pct 40 40 Immed
dbc_min_pct 5 Default Immed
default_disk_ir 0 Default
disksort_seconds 0 Default
dma32_pool_size 268435456 Default
dmp_pathswitch_blks_shift 10 Default
dmp_rootdev_is_vol 0 Default
dmp_swapdev_is_vol 0 Default
dnlc_hash_locks 512 Default
dontdump 0 Default Immed
dst 1 Default
dump_compress_on 1 Default Immed
enable_idds 0 Default
eqmemsize 15 Default
executable_stack 0 Default Immed
fr_statemax 800000 Default Immed
fr_tcpidletimeout 86400 Default Immed
fs_async 1 1
fs_symlinks 20 Default Immed
ftable_hash_locks 64 Default
gvid_no_claim_dev 0 Default
hp_hfs_mtra_enabled 1 Default
intr_strobe_ics_pct 100 Default Auto
io_ports_hash_locks 64 Default
ioforw_timeout 0 Default Auto
is_vxtrace_enabled 1 Default
ksi_alloc_max 32768 (nproc*8) Immed
ksi_send_max 32 Default
max_acct_file_size 2560000 Default Immed
max_async_ports 50 Default
max_mem_window 0 Default
max_thread_proc 1024 1024 Immed
maxdsiz 1073741824 Default Immed
maxdsiz_64bit 4294967296 Default Immed
maxfiles 20480 20480
maxfiles_lim 20480 20480 Immed
maxrsessiz 8388608 Default
maxrsessiz_64bit 8388608 Default
maxssiz 134217728 134217728 Immed
maxssiz_64bit 1073741824 1073741824 Immed
maxtsiz 1073741824 1073741824 Immed
maxtsiz_64bit 1073741824 Default Immed
maxuprc 3686 ((nproc*9)/10) Immed
maxvgs 10 Default
msgmap 4098 (msgtql+2)
msgmax 8192 Default Immed
msgmnb 16384 Default Immed
msgmni 4096 (nproc)
msgseg 32767 32767
msgssz 96 Default
msgtql 4096 (nproc)
ncdnode 150 Default
nclist 8292 Default
ncsize 35840 (ninode+1024)
nfile 63488 (15*nproc+2048) Imm (auto disabled)
nflocks 4096 (nproc) Imm (auto disabled)
ninode 34816 (8*nproc+2048)
nkthread 7184 (((nproc*7)/4)+16) Immed
nproc 4096 4096 Immed
npty 60 Default
nstrpty 60 60
nstrtel 60 Default
nswapdev 10 Default
nswapfs 10 Default
nsysmap 8400 Default
nsysmap64 8400 Default
o_sync_is_o_dsync 0 Default
pa_maxssiz_32bit 83648512 Default
pa_maxssiz_64bit 536870912 Default
pagezero_daemon_enabled 1 Default Immed
pfdat_hash_locks 128 Default
physical_io_buffers 512 Default Auto
pthread_condvar_prio_boost 0 Default Immed
region_hash_locks 128 Default
remote_nfs_swap 0 Default
rng_bitvals 9876543210 Default
rng_sleeptime 2 Default
rtsched_numpri 32 Default
scroll_lines 100 Default
scsi_max_qdepth 8 Default Immed
scsi_maxphys 1048576 Default
secure_sid_scripts 1 Default Immed
semaem 16384 Default
semmni 4096 (nproc)
semmns 8192 (semmni*2)
semmnu 4092 (nproc-4)
semmsl 2048 Default Immed
semume 100 Default
semvmx 32767 Default
sendfile_max 0 Default
shmmax 8589934592 8589934592 Immed
shmmni 512 512 Immed
shmseg 120 120 Immed
st_ats_enabled 0 Default
st_fail_overruns 0 Default
st_large_recs 0 Default
st_san_safe 0 Default Immed
streampipes 0 Default
swapmem_on 1 1
swchunk 2048 Default
sysv_hash_locks 128 Default
tcphashsz 2048 Default
timeslice 10 Default
timezone 420 Default
unlockable_mem 0 Default
vnode_cd_hash_locks 128 Default
vnode_hash_locks 128 Default
vol_checkpt_default 10240 Default
vol_dcm_replay_size 262144 Default
vol_default_iodelay 50 Default
vol_fmr_logsz 4 Default
vol_max_bchain 32 Default
vol_max_nconfigs 20 Default
vol_max_nlogs 20 Default
vol_max_nmpool_sz 4194304 Default Immed
vol_max_prm_dgs 1024 Default
vol_max_rdback_sz 4194304 Default Immed
vol_max_vol 8388608 Default
vol_max_wrspool_sz 4194304 Default Immed
vol_maxio 1024 Default
vol_maxioctl 32768 Default
vol_maxkiocount 2048 Default
vol_maxparallelio 256 Default
vol_maxspecialio 1024 Default
vol_maxstablebufsize 256 Default
vol_min_lowmem_sz 532480 Default Immed
vol_mvr_maxround 256 Default
vol_nm_hb_timeout 10 Default
vol_rootdev_is_vol 0 Default
vol_rvio_maxpool_sz 4194304 Default Immed
vol_subdisk_num 4096 Default
vol_swapdev_is_vol 0 Default
vol_vvr_transport 1 Default
vol_vvr_use_nat 0 Default
volcvm_cluster_size 16 Default
volcvm_smartsync 1 Default
voldrl_max_drtregs 2048 Default
voldrl_min_regionsz 512 Default
voldrl_volumemax_drtregs 256 Default
voliomem_chunk_size 65536 Default
voliomem_maxpool_sz 4194304 Default
voliot_errbuf_dflt 16384 Default
voliot_iobuf_default 8192 Default
voliot_iobuf_limit 131072 Default
voliot_iobuf_max 65536 Default
voliot_max_open 32 Default
volpagemod_max_memsz 6144 Default Immed
volraid_rsrtransmax 1 Default
vps_ceiling 64 64
vps_chatr_ceiling 1048576 Default
vps_pagesize 4 Default
vx_maxlink 32767 Default
vx_ninode 0 Default
vxfs_bc_bufhwm 0 Default
vxfs_ifree_timelag 0 Default Immed
vxtask_max_monitors 32 Default
- I ran UnixChk.sh completed without no errors and give me SUCCESS message.
- I use ./setup.sh -console to install in Unix.
- After the selection of installation modules, location of directories, language, etc. when begin to install OBIEE, it only appears the following message:

Installing $L(com.siebel.analytics.install.AnyStringConstants,
InstallConfig.ProductName) $P(SiebelAnalyticsProductBean.productNumber). Please
wait...

And the installation never completes, I have made many tests, leaving installation in many ranges of time, from 5 minutes to 8 hours and never complete, the version I am installed is OBIEE 10.1.3.3.3.

If anyone have a solution for this, I really appreciate.

Regards,
Arnulfo
Re: Installation of OBIEE in Unix hangs and don't complete [message #472875 is a reply to message #458743] Tue, 24 August 2010 09:45 Go to previous message
heedtheball
Messages: 6
Registered: August 2010
Junior Member
Guys,

Just to underline the cause of this issue. At the end of the summary of your installation interview you will see the space required for the installation you have configured; for a full installation it is likely to be around the 2626.9 MB mark.

In linux, or unix, to verify disk space use the command df -h (which will tell you how much space you have have used and available in GB for each file system).

I would bet that if you're having this issue that the amount of space on your file system is less than the space required. The error handling could be a little better here, I know.

Cheers,

John Lamont Watson
Business Decision Systems

[Updated on: Tue, 24 August 2010 10:01]

Report message to a moderator

Previous Topic: How to convert number to ASCII
Next Topic: Variables in OBIEE
Goto Forum:
  


Current Time: Tue Jan 19 13:20:18 CST 2021